Dräger X-am 5000 Serie Instrucciones De Uso página 27

For your safety
1
The technical manual, the quick reference guide and the sensor
documentation can be downloaded in electronic form from the database for
technical documentation (www.draeger.com/ifu). To do this, enter the part
number or product name in the search dialogue.
Before using the product, carefully read these instructions for use, those of

the associated products and the general instructions for use for sensors
(9023657).
Strictly follow the instructions for use. The user must fully understand and

strictly observe the instructions. Use the product only for the purposes
specified in the intended use section of this document.
Do not dispose of the instructions for use. Ensure that they are retained and

appropriately used by the product user.
Only trained and competent users are permitted to use this product.

Comply with all local and national rules and regulations associated with this

product.
Only trained and competent personnel are permitted to inspect, repair and

service the product as detailed in these instructions for use (see
Chapter "Maintenance" on Page 47). Further maintenance work that is not
detailed in these instructions for use must only be carried out by Dräger or
personnel qualified by Dräger. Dräger recommend a Dräger service contract
for all maintenance activities.
Use only genuine Dräger spare parts and accessories, or the proper

functioning of the product may be impaired.
Do not use a faulty or incomplete product. Do not modify the product.

Notify Dräger in the event of any component fault or failure.

Safe coupling with electrical device
Electrical connections to devices which are not listed in these instructions for use
should only be made following consultation with the respective manufacturers or
an expert.
Use in areas subject to explosion hazards
Devices or components for use in explosion-hazard areas which have been
tested and approved according to national, European or international explosion
protection regulations may only be used under the conditions specified in the
approval and with consideration of the relevant legal regulations. The devices or
components may not be modified in any manner. The use of faulty or incomplete
parts is forbidden. The appropriate regulations must be observed at all times
when carrying out repairs on these devices or components.
For your safety en
27