Idiomas disponibles
Idiomas disponibles
TESTING
❒ Turn on the circuit breaker and light
switch.
NOTE: Sensor has a 1
riod before it will detect motion. When
first turned on, wait 1
Note: Meets the ENERGY STAR
when D
B
function is off.
®
ual
rite
❒ Switch the on-time to TEST position and
D
B
switch to the OFF position.
®
ual
rite
TEST 1 5 10 MIN
ON-TIME
Avoid aiming the control at:
• Objects that change temperature rapidly,
such as heating vents and air condition-
ers. These heat sources could cause false
triggering.
• Areas where pets or traffic may trigger
the control.
• Nearby large, light-colored objects
reflecting light may trigger the shut-off
feature. Do not point other lights at the
sensor.
6 ft.
(1.8 m)
30 ft.
(9.1 m)
Maximum Range
All manuals and user guides at all-guides.com
/
minute warm up pe-
1
2
/
minutes.
1
2
guidelines
®
OFF 3 6 DUSK TO
HOUR
DAWN
180°
Maximum
Coverage Angle
The detector is less sensitive to motion di-
rectly towards it and more sensitive to across
motion.
Motion
Sensor
Least Sensitive
❒ Walk through the coverage area noting
where you are when the lights turn on.
❒ If you need to change the sensitivity,
temporarily remove the fixture and make
the adjustment. Too much sensitivity may
increase false triggering.
❒ Set the amount of TIME you want the light
to stay on after motion is detected. (1, 5,
or 10 minutes).
❒ Set the amount of time after dusk you want
the lights on accent level.
6
Motion
Most Sensitive
595-5628-08
