Idiomas disponibles
Idiomas disponibles
TECHNICAL TROUBLESHOOTING GUIDE
PROBLEMS
The kneading paddle is
stuck in the pan.
After pressing on
nothing happens.
After pressing on
the motor is on but no
kneading takes place.
After a delayed start,
the bread has not risen
enough or nothing
happens.
Burnt smell.
66
• Let it soak before removing it.
• EO1 is displayed and flashes on the screen, the appliance
,
beeps: the appliance is too hot. Wait 1 hour between 2 cycles.
• EOO is displayed and flashes on the screen, the appliance
beeps: the appliance is too cold. Wait for it to reach room
temperature.
• HHH or EEE is displayed and flashes on the screen, the
appliance beeps: malfunction. The machine must be serviced
by authorised personnel.
• A delayed start has been programmed.
,
• The pan has not been correctly inserted.
• Kneading paddle missing or not installed properly.
In the two cases cited above, stop the appliance manually with
a long press on the
beginning.
• You forgot to press on
programme.
• The yeast has come into contact with salt and/or water.
• Kneading paddle missing.
• Some of the ingredients have fallen outside the pan: unplug
the appliance, let it cool down, then clean the inside with a
damp sponge and without any cleaning product.
• The preparation has overflowed: the quantity of ingredients
used is too great, notably liquid. Follow the proportions given
in the recipe.
CAUSES - SOLUTIONS
button. Start the recipe again from the
after programming the delayed start
