Idiomas disponibles
Idiomas disponibles
When the value set on the display stops flashing, the value is saved and the led switches steady
on. When the set time finishes, the appliance starts working.
To deactivate the function before the appliance start up,set the TIMER time to "00", switch the
appliance on or off.
With the appliance running
press the key once or more to enter the function and set the switch off delay time (from 1 to 24 hours),
the led TIMER blinks in blue.
When the value set on the display stops flashing, the value is saved and the led switches steady on.
When the set time finishes, the appliance switches off.
To deactivate the function, set the operation time to "00" or switch off the appliance.
Timer led
This led turns on in blue when the function is active.
While the led flashes, it is possible to set the operation time (from 1 to 24 hours). Once the
desired time has been selected, wait for the led to stop flashing; the function is active.
+ key
Press this key when the appliance is running to increase the desired percentage of humidity
in the room.
Default value is 60% - Value settable from 20% to 80% (steps of 5 at a time).
Keep key "+" pressed for about 5 seconds, the display shows the room temperature (°C).
- key
Press this key when the appliance is running to decrease the desired percentage of humidity
in the room.
Fan key
Press this key when the appliance is running to select the desired fan speed.
- Maximum speed
- Minimum speed
DRY CLOTHES key
Press this key when the appliance is running to select the desired function.
- Dehumidifier
Air filter to clean warning led
When the appliance reaches 600 hours of operation, this led flashes in red indicating that it is
necessary to proceed with the filter cleaning (see the "Cleaning" paragraph).
Switch the appliance off, disconnect the plug from the power socket and proceed with the filter
cleaning.
Wait for the filter to have completely dried before repositioning it.
Do not use the appliance without filter or if the latter is damaged.
Display
The display has three functions.
• When the appliance is electrically powered or it is running, the display shows the percentage
of humidity in the room.
• During the percentage of humidity setting ("+" and "-" keys), it shows the percentage of hu-
midity you desire to set (if no key is pressed within 5 seconds, the display returns to show
the percentage of humidity in the room).
• During the Timer setting, it shows the operation time you desire to set (if no key is pressed
within 5 seconds, the display returns to show the percentage of humidity in the room).
- Led
turned on in red
- Led
turned on in blue
- Led
turned on in blue
EN - 18
AQUARIA SLIM
