Idiomas disponibles
Idiomas disponibles
2.
Longer life and better performance can be
obtained if the battery pack is charged when
the air temperature is between 65
(18
C-24
C). Do not charge the battery pack
0
0
in air temperatures below 32
104
F(40
C). This is important as it can prevent
0
0
serious damage to the battery pack.
3.
Never freeze your charger or immerse charger
in water or any other liquid.
4.
When the battery pack fails to produce
sufficient power on jobs that were previously
done easily, please recharge your battery, do
not continue to use under this condition. You
may charge a partially used pack whenever
you desire with no adverse affect on the battery
pack.
5.
When charging it is normal that the charger
and battery pack may become warm to touch.
6.
If the battery pack does not charge properly:
a.
Check current at power outlet by plugging in
another appliance.
b. Plug and unplug to check whether the charger
is ok
c.
Check whether the battery has been damaged
d. Move the charger and battery pack to a
location where the surrounding air temperature
is approximately 65
e.
If the charging problem persists, take the tool,
battery pack and charger to an authorized
service center.
8
f.
Under certain conditions, when the charger is
plugged into the power supply, the exposed
EN
charging contacts inside the charger can be
shorted by foreign material. Foreign materials of
a conductive nature such as metallic particles
should be kept away from charger cavities.
Always unplug the charger from the power
supply when there is no battery pack in the
charger or before attempting to clean.
PROBLEM SOLUTION
1. I CANNOT FIT THE BATTERY INTO
THE BATTERY CHARGER. WHY?
a)
Check if the charger and the battery pack are
specifically designed for working together.
b) The battery can be inserted into the charger
only in one direction. Turn the battery around
until it can be inserted into the slot, the
indicator light should be green and flash when
the battery is charging.
2. REASONS FOR DIFFERENT
CHARGING TIMES
The charging time can be affected by many reasons
which are not defects in your product.
a)
If the battery pack is only partly discharged it
may be re-charged in less than rated charging
time.
b) If the battery pack and ambient temperature are
very cold/ hot, it may take longer to re-charge.
Please find an appropriate environment with
F and 75
0
F (0
C), or above
0
0
F and 75
F (18
C-24
C).
0
0
0
0
proper air temperature to start charging.
F
0
MAINTAIN TOOLS WITH
CARE
Remove the plug from the socket before carrying
out any adjustment, servicing or maintenance.
Your tool requires no additional lubrication or
maintenance. Never use water or chemical cleaners
to clean your power tool. Wipe clean with a dry
cloth. Always store your power tool in a dry place.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
FCC PART 15
SUPPLIER'S DECLARATION
OF CONFORMITY
PRODUCT DESCRIPTION : Battery Charger
MODEL NUMBER : KA3712/KA3714
TRADE NAME : Kress
THIS DEVICE COMPLIES WITH PART 15 OF THE
FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
RESPONSIBLE PARTY :
POSITEC USA, INC.
10130 PERIMETER PARKWAY, CHARLOTTE, NC
28216 USA
TEL.: (704) 599-3711
FAX: (704) 599-6390
