Idiomas disponibles
Idiomas disponibles
CLEANING THE FLOOR BRUSH
1.
Remove the floor nozzle from the upright vacuum cleaner. Press the
the back of the floor nozzle and remove it from the machine.
2.
Unclip the cover on the left side of the floor nozzle.
3.
Remove the
rotating floor brush from the floor nozzle.
4.
Remove hairs and other dirt that have wrapped around the floor brush. If you do not
clean the floor brush regularly, it will become damaged and your machine will become
unusable.
5.
The rotating floor brush may be rinsed off under running water. Make sure that it is
completely
dry before using it.
6.
Place the floor brush back into the floor nozzle when it is clean.
7.
Click the closure valve back into place to close it.
8.
Push the nozzle back onto the stick. The machine is now again ready for use.
Stuck hairs can
damage the machine or your floor. Always remove the hairs stuck on the
brushes.
CLEANING THE MACHINE
Clean the machine with a slightly moist soft cloth. Dry the machine off well. Never submerge
the machine in water!
PROBLEM AND SOLUTION
Problem
The machine does not start up.
www.domo-elektro.be
· The battery is empty. Charge the machine.
· The battery is not inserted properly. Insert the
battery until it clicks into place.
release button at
Solution
39
DO1020SV
