Silvercrest SSP 2600 A1 Instrucciones De Uso página 33

Troubleshooting
The power bank does not charge
♦ Connection may be faulty . Check the connection .
♦ Some computers deactivate the power supply to
the USB ports when they are turned off . Check that
the computer is turned on .
A connected device will not charge
♦ The integrated battery is empty . Charge the battery .
♦ No connection to the device . Check the connection .
♦ Press the On/Off button 8 briefly to start the
charging process .
♦ The charging current of the connected device is too
low (< 60 mA) or too high (> 1 A) .
The selfie stick cannot be turned on
♦ Make sure that the battery of the power bank is
charged; otherwise the selfie stick will not work . If
necessary, charge the power bank battery before
using the selfie stick . Refer also to section "Charg-
ing the power bank" .
The Bluetooth
The Bluetooth
♦
activated . To check this, press the photo button 6 .
If the Bluetooth
tooth
LED 7 lights up . If this is not the case, press
®
and hold the On/Off button 8 for 2 seconds to
activate the Bluetooth
stick .
The Bluetooth
♦
or compact camera is not activated . Activate the
Bluetooth
to the operating instructions of your smartphone or
compact camera .
♦ The selfie stick and the smartphone or compact
camera are not paired . Make the connection as
described in the section "Connecting the selfie
stick and smartphone/compact camera via Blue­
tooth
® " . For further information, refer to the oper-
ating instructions of your smartphone or compact
camera .
│ GB │ IE
■ 30
connection cannot be established
®
® function on the selfie stick is not
function is activated, the Blue­
®
®
® function on the smartphone
® function . For further information, refer
function on the selfie
SSP 2600 A1