Technical Data
Description
Engine displacement
Engine rated power
Motor type
Gasoline tank capacity
Fuel efficiency
at 100% load
Inlet and outlet diameter
Maximum suction depth
Maximum height
Maximum flow
Sound level
Thermal energy consumption
Fuel requirements
• The equipment has an air-cooled 4-stroke engine that
uses pure unleaded gasoline.
• Do not mix oil with fuel for any reason.
WARNING
• Do not use fuels blended with ethyl
alcohol (gasohol), ethanol or methane for any reason as
they can attract moisture which causes separation and
formation of acids during storage. Acidity can damage the
engine's fuel system when in storage.
• In order to avoid problems with the engine, the fuel
system must be emptied before storing the equipment
for periods of 30 days or more. Drain the fuel tank
placing a suitable container for fuel. Start the engine by
letting it run until the rest of the fuel is used up and the
machine shuts itself off. The following season, use fresh
gasoline.
• Never use inside the gasoline tank, products to clean
engines or carburetors as it can cause permanent damage.
Code
Speed
Fuel
Oil type
Weight
MOTB-14
102432
Self-priming motorized pump
36 (cc)
970 W (1.3 Hp)
4 stroke OHC
6 500 RPM
Gasoline
0.7 L
85 minutes
SAE 10W-30
1"
26 ft
82 ft
110 L/min
Lower than 81 dB at 13 ft
0.46 L/h
15 lb
Do not use the equipment in enclosed spaces.
DANGER
To avoid breathing buildup of carbon
monoxide, a potentially deadly toxic odorless gas.
Never smoke near fuel.
DANGER
Do not smoke near the refueling
area or when operating the equipment.
3
ENGLISH
