Idiomas disponibles
Idiomas disponibles
FR
Step 2: Take out the controller and keep the battery in place, the inductor light will be on. If not
in place, the inductor light will not be on. No need to cover the battery lid before well-coding.
ES
Step 3: Keep ear close to the head of motor and then turn on the power under a quite
PT
time, you will hear a clear but small and short sound «Di». This shows it work well. If without
that sound, you need to check the cord-connecting or the power.
I T
Step 4: 1. Find «P2» button in the battery slo rstly 2. Keep ear near to the head of motor under
quite environment and then press «P2» button 2 times successively. At the same time you will
EL
hear «Di-Di», small and more shorter.
Step 5: After the sound of «Di-Di», press «Open» button for 3 seconds and then release, you will
PL
hear successive short sound of «Di-Di---» at the same time when you press the «open» button.
That means motor-coding works
UA
Step 6: 1. Check whether motor is working. 2. If motor is on the work, press «close» button for
3 seconds. If motor turns in the contrary direction as when opening «open» button. It means
RO
motor can work normally. (If motor refuse to turn, then it needs to adjust its limit. (See Method
for adjusting motor limit)).
EN
8. WARNING
Attention: Wel
adjust the motor again.
The user can adjust the limit of one direction at one time, do not adjust two knobs at the same
time.
Do not turn k
cycle, and check if the setting you sa
WARNING
The replacement and installation of batteries must be done by an adult.
Remove the worn out batteries of this product.
Do not expose the batteries t re, they may leak or explode.
Do not short-circuit the battery terminals.
Do not mix old batteries with new ones.
Do not use rechargeable batteries in this product.
Do not recharge batteries that are not rechargeable.
Use only the recommended type of batteries.
Keep this product away from the reach of children.
tting program already for all electric it
rcely, please check the limit with remote control per revolute about half
86
al client no need
