Idiomas disponibles
Idiomas disponibles
DH 600
14) Hydraulic cut-off.
*To avoid electric shock.Do not open.There are no userserviciable parts inside.
*Any repair work must be done by qualified technician appointed by our distributors.
*Specifications are subject to change for improvement without prior notice.
SPECIFICATIONS
Moisture removal: Approximately 600ml per day at 30ºC,80% RH
Cooling Element: Thermo-electric Peltier module.
Fan:
90x90mm high speed long life DC brushless motor with turbo blades.
A.C./ D.C. power supply:12V DC 6Amp.
Power consumption: 72W
Water tank capacity: 2 Litre
Water level Detector: Automatic switch off with 'Yellow' LED indicator when water tank is full.
Drying feature: Warm air outlet on both sides for drying purposes.
Product dimension: 245mm (W)x360mm(H)x185mm(D)
Working enviorment: Over 15º C, over 40% RH.
CONNECTION
1. After removing the packiging materials, there should be 2 items:
a.Midi dehumidifier.
b.AC/DC switching mode power supply.
2. Plug the DC power jack(11)of the switching mode power supply to the DC power socket(8),then connect
the AC plug(12) of the switching mode power supply to the appropriate main socket.
Press the 'On/ Off'button(1) to 'On' position, the midi dehumidifier will begin to operate.The green LED will
be turned on.Listen and feel for the air blowing form dry air outlet(fig 1).
To switch off the unit press'on/off' button(1) to 'Off' position, the midi dehumidifieer will be turned off.(as
fig.2).
REMOVABLE WATER TANK
When the wáter tank is full, with approximately 1.5 litre of wáter collected,the unit will be switched off
automatically and the 'Yellow' LEd(3) will be on.(as fig.3)
10
