Fitting The Harness; Starting / Stopping The Engine - Stihl HT 56 C Manual De Instrucciones

Fitting the Harness

The type and style of the shoulder strap
depend on the market.
Shoulder strap
1
2
Put on the shoulder strap (1).
N
Adjust the length of the strap.
N
With the power tool attached, the
N
carabiner (2) must be at about the
same height as your right hip.
HT 56 C
Starting / Stopping the
Engine
Versions with Easy2Start
WARNING
This machine is extremely simple and
easy to start, even for children.
To reduce the risk of serious or fatal
injury:
do not allow children or other
–
unauthorized persons to attempt to
start or otherwise use the machine
never allow children or
–
unauthorized persons access to the
machine
never leave the machine
–
unattended while working or during
work breaks
after work, store in a safe, secure
–
location out of the reach of children
and other unauthorized persons
Controls
3
1
2
1 Throttle trigger lockout
2 Throttle trigger
3 Stop switch with Run and 0 = Stop
positions.
Function of stop switch and ignition
system
The stop switch is normally in the Run
position, i.e. when it is not depressed:
The ignition is switched on – the engine
is ready to start. If the stop switch is
moved to the 0 position, the ignition is
switched off. The ignition is switched on
again automatically after the engine
stops.
Starting the Engine
4
Press the manual fuel pump
N
bulb (4) at least five times – even if
the bulb is filled with fuel.
Cold engine (cold start)
5
Press in the choke knob (5) and turn
N
it to g at the same time.
English
23