Idiomas disponibles
Idiomas disponibles
Starting / Stopping
the Engine
Only models with Decompression
valve
:
Press in the button (arrow) to open
the decompression valve.
The valve closes automatically as soon
as the engine begins to fire.
:
For this reason the decompression
valve should be pressed in before
each starting attempt.
MS 440, MS 440 W, MS 440 C
0
1
All models
:
Observe safety precautions –
see "Safety Precautions".
:
Push hand guard (1) forward:
The chain is now locked.
:
Press down trigger interlock (2) and
squeeze throttle trigger (3) at the
same time.
Set Master Control lever to:
for cold start l
for warm start n
(even if engine has been running
but is still cold)
STOP
2
3
:
Place your saw on the ground.
Make sure you have a firm footing –
check that chain is not touching any
object or the ground.
Bystanders must be well clear of the
general work area of the saw.
:
Hold the saw firmly on the ground
with your left hand on the front
handle – your thumb should be
under the handle.
:
Put your right foot into the rear
handle and press down.
English / USA
35
