Idiomas disponibles
Idiomas disponibles
Chain Lubricant
For automatic and reliable lubrication of
the chain and guide bar – use only an
environmentally compatible quality
chain and bar lubricant. Rapidly
biodegradable STIHL Bioplus is
recommended.
Biological chain oil must be
resistant to aging (e.g. STIHL
Bioplus) since it will otherwise
quickly turn to resin. This results
in hard deposits that are difficult to
remove, especially in the area of
the chain drive, clutch and chain.
It may even cause the oil pump to
seize.
The service life of the chain and guide
bar depends on the quality of the
lubricant. It is therefore essential to use
only a specially formulated chain
lubricant.
Do not use waste oil. Renewed
contact with waste oil can cause
skin cancer. Moreover, waste oil is
environmentally harmful.
Waste oil does not have the
necessary lubricating properties
and is unsuitable for chain
lubrication.
MS 192 C
Filling Chain Oil Tank
Preparations
Thoroughly clean the oil filler cap
N
and the area around it to ensure that
no dirt falls into the tank.
Position the machine so that the
N
filler cap is facing up.
Open the filler cap.
N
Filling chain oil tank
Refill the chain oil tank every time
N
you refuel.
Take care not to spill chain oil while
refilling and do not overfill the tank.
Close the filler cap.
N
There must still be a small amount
of oil in the oil tank when the fuel
tank is empty.
If the oil level in the tank does not
go down, the reason may be a
fault in the oil supply system:
Check chain lubrication, clean the
oilways, contact your dealer for
assistance if necessary STIHL
recommends that you have
servicing and repair work carried
out exclusively by an authorized
STIHL servicing dealer.
English
29
