Information Before You Start; Starting / Stopping The Engine - Stihl BR 500 Manual De Instrucciones

3
: Loosen the screw (3).
3
4
: Swing the shutter (4) to the winter
position (r).
: Tighten down the screw (4) firmly.
At temperatures above 20°C (68°F):
: Return the shutter (4) to the summer
position (s) since there is
otherwise a risk of the engine
overheating and causing running
problems.
BR 500, BR 550, BR 600
Information
Before You Start
1
2
Setting lever (1)
Throttle trigger (2)
0 = Engine stop
Ignition is interrupted, the engine
stops. Setting lever does not remain
in this position, it springs back.
# = Run position
Engine runs or can be started.
Throttle trigger can be operated
normally.
C= Lock position
The throttle trigger can be locked in
three positions: 1/3 throttle, 2/3
throttle and full throttle.
To disengage the lock, move the
setting lever back to the normal run
position #
English / USA
Starting / Stopping
the Engine
Starting the Engine
Start the machine on a clean and
dust-free patch of ground to ensure
that no dust is sucked in.
: Move the setting lever (1) to #
: Press fuel pump bulb at least five
times – even if the bulb is filled with
fuel.
19