Accessories (Supplied On Request); Air Clean Filter; Supplementary Basket Or Support Guide Kit For Outdoor Unit - Technibel Climatisation SMDV Instrucciones De Uso

ACCESSORIES (SUPPLIED ON REQUEST)

AIR CLEAN FILTER

Read these instructions before starting replacement
G
work.
This "Air Clean Filter" collects dust as well as deodori-
G
zes.
EG
NOTE
1.This carton box contains an air clean filter, a spring and
a label "Color gauge for filter replacement".
2.Open the bag just before installing the air clean filter.
lf not, the deodorization effect durability of the filter may
be decreased.
1
Filter installation procedure:
Open the air intake grille and remove the standard filter.
Stick the label "Color gauge for filter replacement" in an
easy-to-see postion (inside of control panel cover).
2
Attach the spring onto the standard filter:
Hook the spring onto the air filter from its rear side and
engage it into the groove on the "FRONT" mark side (use of
a standard screwdriver is recommeded fo easy setting).
3
Secure the "air clean filter" onto the standard filter by the
spring attached before in step 2.
4
Set the standard filter in the air conditioner with its
"FRONT" mark towards you and close the air intake grille.
Replacement of air clean filter
The air clean filter is disposable.
G
Do not throw away the filter frame and sping.
G
The used filter cannot be reused even after cleaning up.
G
Buy the air clean filter for replacement at your nearest
G
dealer.
Check the state of dirtiness at least once every two
G
weeks and replace the filter when it changes to be so
dirty as the color of the label "Color gauge for filter repla-
cement".

SUPPLEMENTARY BASKET OR SUPPORT GUIDE KIT FOR OUTDOOR UNIT

If you want to utilise the air conditioner in several rooms, it is possible to buy varies baskets or support guides for
the installation of outdoor unit.
2 holes ø 10
BASKET
6
standard
filter
200
SUPPORT GUIDE
spring
"Air clean filter"
standard filter side: white
(dust collecting filter)
Spring side: black
(deodorizing filter)
standard filter
spring
2 holes ø 10
support-
guide
standard filter
air intake
grille