Brandt B3225HD LED Manual De Instrucciones página 5

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 119
Warning
Avoid harsh conditions such as wet or damp places, high humidity, strong
vibration, extremely high or low temperatures, strong sunlight and places that are
very dusty.
Never fit makeshift stands or legs to the television.
Never push objects into holes and ventilation slots.
To prevent electric shock do not remove any cover.
Do not touch the LED display as it gets warm when in use, this is normal and is
not a fault.
If anything goes wrong do not try to fix it yourself, get a qualified service agent to
look at it.
Pull out the mains plug and disconnect the aerial lead during thunder storms.
Ventilation
Place the television on a hard flat surface away from direct sunlight or heat
sources. If it is in a cabinet allow at least a 10cm gap all around. Do not obstruct
the ventilation slots, including those underneath with soft furnishings.
Overheating will shorten the life of the television and increase the risk of fire.
Cleaning
Disconnect the mains supply and use only a lightly dampened soft cloth. Do not
use chemical solvents or strong detergents as these may damage the cabinet or
screen.
Never allow water droplets to remain on the screen as moisture can cause
permanent discolouration.
Greasy marks must only be removed with a commercial cleaner specifically
recommended for LED screens.
Eye Fatigue
When using this product as a computer monitor, health and safety experts
recommend short frequent breaks rather than occasional longer breaks. For
example a 5-10 minute break after an hour of continuous screen work is
considered to be better than a 15 min break every 2 hours.
Do not use the monitor against a bright background or where sunlight or other
bright light sources will shine directly onto the screen.
3
loading

Este manual también es adecuado para:

B4025fhd led