EN
4.
LOCKING THE CONTAINER
Before operating the appliance, it is necessary to fit the coffee bean container (2).
• Insert the container (2) into its seat, positioning it so that the hole lines up with the screw
on the back part of the appliance.
• Tighten the lock screw.
5.
INSTRUCTIONS FOR USE
5.1
INTRODUCTION
• After having plugged the appliance in, push the tab (3) at the bottom of the coffee bean
container (2) to close it.
• Remove the cover (1) from the container (2) and fill it with coffee beans.
• Bring the switch (5) to on position.
• Pull the tab (3) permitting passage of coffee beans.
• Wait for the doser unit to fill to the halfway point, then place the filter holder cup on the fork
(8) and use the doser lever (6). Each stroke of the lever is a single dose of ground coffee.
• Switch off the switch to stop the grinding operation.
☞
In the interests of preventing damage and accidents, never place fingers or
other items into the spout below the doser while the ground coffee is being
dispensed.
MDJ
17