Idiomas disponibles
Idiomas disponibles
SYSTEM LAY-OUT
280/11,2"x300/12"
Œ
Ž
Ž
Ž
1 - RAPID S barrier
2 - Photoelectric cells
3 - Galvanized column for P.E. cells
4 - Strip with Photo electric cells
Parts to install meeting the EN 12453 standard
COMMAND TYPE
with manned operation
with visible impulses (e.g. sensor)
with not visible impulses
(e.g. remote control device)
automatic
* a typical example are those shutters which do not have access to any public way.
A: Command button with manned operation (that is, operating as long as activated), like code
ACG2013.
B: Key selector with manned operation, like code ACG1010.
C: Safety edges, like code ACG3010 and/or other safety devices to keep thrust force within the limits
of EN12453 regulation - Appendix A.
D: Photocells, like code ACG8026.
5 - Magnetic loop
- Key selector
- Tuned aerial
USE OF THE SHUTTER
Skilled persons
Skilled persons Unrestricted
(out of a public area*)
(public area)
A
B
C
C
C
C e D
C e D
C e D
3000/118" - 4000/157"
T
ECHNICAL FEATURES
Ambidextrous irreversible gearmotor used to actuate booms up to
4 m / 157" inches long. For non intensive applications (less
then 400 cycles a day) our operator RAPID S can be equipped
with a boom long up to 5 m. For intensive applications (more
then 400 cycles) use only operator RAPID N (code AA50080).
The cabinet of the operator is treated with cataphoresis and thermal
spray coating. The barrier boom can be supplied as a single piece
or, in the case high objects may hinder its travel, you can require it
Ž
in the articulated version, specifying the height of this obstacle from
the ground (Fig. 11).
The barrier boom with RIB profile is constructed for being fitted with
a pneumatic safety strip or with a photocell strip (Fig. 1-14).
N.B. You must make installation features comply with laws and
standards in force.
TECHNICAL DATA
Ž
Max. boom lenght
Opening time
EEC Power supply
Ž
Motor capacity
Power absorbed
Capacitor
Max. torque
EEC Power supply
Motor capacity
Power absorbed
Capacitor
2
Max. torque
Normative cycles 230V
Normative cycles 120V
Daily operations suggested
use
Service
Guaranteed consecutive cycles
C e D
C e D
Lubrification
C e D
Weight of electroreducer
Working Temperature
Protection IP
A
SSEMBLING RAPID S
After you have cemented in the base plate where you want it, mount
RAPID S using the nuts provided and a no. 19 hexagonal wrench.
Measurements
in mm/inch
1
RAPID S
3-4/118"-157" m/in service intensive
5/197" m/in service not intensive
s
3
230V~ 50Hz
60Hz
W
240
285
A
1
1,3
10
10
µF
Nm/lbsm 80/176
73/160.5
120V~ 60Hz
W
186
A
2
25
µF
Nm/lbsm
54/119
n°
∞ - 3s/2s
n°
∞ - 3s/2s
n°
1200 for boom 3-4 m
400 for boom 5 m
100%
n°
1200 for boom 3-4 m
400 for boom 5 m
IP MELLANA 100
kg
62
°C
-10 ÷ +55
IP
54
G G
B B
