Idiomas disponibles
Idiomas disponibles
Safety Overload
s NOTICE: Do not exceed 30 minutes of continuous
operation.
1. The motor of this device has a built-in thermal overload protector.
Should the motor overheat, the protector will automatically shut
off the motor. Should this occur, move the ON/OFF switch
to the OFF position and allow the motor to cool down for
approximately 30 minutes before turning it on again.
2. If the overload protector shuts off the motor frequently, you may
have an unstable voltage situation.
3. If the device shuts down and cannot restart, it may need to
be replaced. Call your Graham-Field authorized distributor
immediately.
JB0112-090-INS-LAB-RevA18
11
