Idiomas disponibles
Idiomas disponibles
notIce:
The top cord hook rotates to easily release the cord ready for next use.
notIce:
With the handle tube in the upright position, the cord neatly wrapped
around the cord hooks your steam mop will stand on its own for storage. alternatively
there is a hanging bracket built into the hand grip which will allow your steam mop to be
hung from a suitable hook on the wall. always ensure that your wall hook is capable of
supporting the weight of the steam mop safely.
Your Black+Decker corded appliance has been designed to operate over a long
period of time with a minimum of maintenance. continuous satisfactory operation
depends upon proper appliance care and regular cleaning.
WarnInG:
switch off and unplug the appliance.
• Clean your appliance using a soft damp cloth. Never let any liquid get inside the
appliance; never immerse any part of the appliance into a liquid. IMPortant: To
assure product SaFeTY and relIaBIlITY, repairs, maintenance and adjustment
should be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
• For stubborn marks you can use a mild solution of soap and water to dampen your cloth.
care of the cLeanInG Pads
notIce:
Follow the cleaning instructions printed on the label of your cleaning pad.
Wash care instructions - Machine wash warm 140°F (60°c) - No bleach - No fabric
softener - air dry only - allow to dry fully before re-use.
recommended accessories for use with your appliance are available from your local
dealer or authorized service center. If you need assistance regarding accessories, please
call: 1-800-544-6986.
WarnInG:
appliance could be hazardous.
ProBLeM
• Unit will not start.
• Mop will not make steam. • No water in water tank.
• Mop leaves water on floor. • Cleaning pad is too wet. • Unplug unit from power outlet
MaIntenance and cLeanInG
Before performing any maintenance or cleaning on corded appliances
accessorIes
The use of any accessory not recommended for use with this
trouBLeshootInG
PossIBLe cause
• Cord not plugged in.
• Main switch not on.
• Floor head not correctly
fitted.
• Handle not fitted
correctly - leD's do not
light up.
• Circuit fuse is blown.
• Circuit breaker is tripped. • Reset circuit breaker. (If the
• Cord or switch is
damaged.
PossIBLe soLutIon
• Plug appliance into a working outlet.
• Turn main switch on.
• Ensure floor head is correctly
attached.
• Fit Handle correctly
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a Black+Decker
service center or authorized
servicer.)
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a
Black+Decker service center or
authorized servicer.)
• Have cord or switch replaced
at a Black+Decker Service
center or authorized Servicer.
• Add water to the water tank.
and change the micro-fiber
cleaning pad.
10
