Idiomas disponibles
Idiomas disponibles
RH 2000
PARTS DESCRIPTION
A. Thermostat
B. Power setting switches
C. Cord storage
D. Castors
E. Supports
You can check the model you have purchased by looking at the appliance's technical label.
ASSEMBLY RH 2000
The oil radiator is packed with the wheels not assembled. Please make sure that they are right
assembled before turning the device on.
Remove the heater and all the accessories from the carton.
1- Turn the radiator upside down carefully and place it over a carpet or any other soft surface in order
not to damage the unit.
2- Pass the "U bolt" in between the last and next-to-last fin and make it fit the holes of one of the
support. Screw the U bolt to the curved support with the help of the wing nuts. Then, screw the
wheels to the support. See picture below.
3- Repeat step 2 in between the first and the second fin, using the other support.
4- Turn the heater the right way up. The unit should be as shown in below picture
USING THE THERMOSTAT AND POWER SWITCHES
1. Select the power of the radiators by pressing the switches:
I
RH 2000
800W
II
I + II (III)
1200W
2000W
13
