Ghibli & Wirbel Power Indust 60 TP M Uso Y Mantenimiento página 56

Remove from underneath the vacuum cleaner the pin (A) and spring pin (B) that fasten the filter to the
shaking lever.
.
Remove the filter with its complete support.
Loosen the clamp and remove the support ring with seal.
Remove the knots and take out the pocket filter. Fit the new filter and put everything back in place,
locking the cap.
Warning!
All the material trapped by the filter and the filter itself must be disposed of through authorised channels
in the country where the vacuum cleaner is used.
The container locking operation must be performed by one person only, who must grip the two handles at
the same time with both hands and press these fully down.
Warning!
Hand crushing hazard!
A
ENGLISH- 23 -
Maintenance Section
B