Idiomas disponibles
Idiomas disponibles
NOTICE:
To prevent dust from getting into the
motor:
•
Make sure that the dust bag or paper filter is
installed before use.
Insert the dust stopper together with the
•
dust bag or paper filter all the way into the
slots when installing them.
Do not use a broken or ripped bag.
•
Otherwise the motor may be broken.
NOTICE:
Do not fold the cardboard at its open-
ing when installing the paper filter.
NOTICE:
Never throw away the dust stopper
because it needs to be used repeatedly whenever
either the dust bag or the paper filter is used.
NOTICE:
The paper filter for the cleaner is an
important component for maintaining the tool
performance. Using other than the genuine paper
filter may cause smokes or ignition.
NOTE: When the dust bag or the paper filter is not
installed in the cleaner, the front cover does not close
completely.
Fig.6
Installing dust bag
Use the dust stopper when installing dust bag. Be
careful not to take the upper side for the lower side by
mistake because they are different each other.
Fig.7
► 1. Upper side of dust stopper 2. Lower side of dust
stopper
1
2
1.
Insert the protrusion of the dust bag into the lower
groove on the dust stopper as shown in the figure.
1
2
Fig.8
► 1. Dust stopper 2. Lower groove 3. Dust bag
There is no distinction between the upper and lower
sides of the dust bag. You may insert its protrusion of
either side into the lower groove of the dust stopper.
Fig.9
► 1. Lower groove
2.
Overlap the frame of dust stopper with that of the
dust bag.
Fig.10
8 ENGLISH
3
1
