Idiomas disponibles
Idiomas disponibles
Basic Operation
18-01-271-933440.indb 10
"ENTER/MUTE" Button
To toggle settings options while viewing a control menu option, tap this button.
The UPS power failure alarm can also be temporarily silenced by tapping this
button. Once silenced, an alarm will automatically re-sound to indicate low
battery conditions and can no longer be silenced.
• May be used in conjunction with the ON/OFF button to cancel the "OFF"
function. See "ON/OFF Button" instructions.
• May be used in conjunction with the ENTER/MUTE button to restore the LCD
to Factory Mode. See "ON/OFF Button" instructions.
Note: Alarm-free silent operation is available by setting the alarm to disable (see
Control Menu Options / Alarm Enable-Disable section).
Battery Capacity: This will be active in all "Display" modes, and is not shown
in "Control" modes.
AC Input: This indicates the unit is running in Line Mode and supplying AC
power to equipment connected to the output.
Battery Input: This will flash to indicate the UPS is not receiving AC input and
is running in inverter mode. The Battery Input icon is also used in conjunction
with the EVENTS icon to indicate On Battery events.
Replace Battery Icon: In the event that UPS batteries expire and require
replacement, this icon and the warning icon will flash (see Battery Warnings
section for details).
Note: This icon will also flash after a failed UPS self-test (see the Basic Operation /
Control Menu Options / Self-Test section for more information).
Warning: This will flash to let the user know there's a warning condition and
immediate action must be taken:
1. For Replace Battery: Replace Battery and Warning icons flash during any
normal "Display" mode.
2. For Overload: Load, Warning and Load Percentage icons will flash, the alarm
will sound repeatedly and the LCD screen will switch from the user-selected
display mode to Load Percentage. Overload indication is available in both AC
and battery modes. CAUTION! Any overload condition that is not
corrected by the user immediately may cause the UPS to shut down
and cease supplying power in the event of a blackout or brownout.
EVENTS Icon: Displayed in conjunction with the AVR icon and BATT icons to
indicate the number of On Battery or AVR events that have occurred.
Alarm Off: Indicates the alarm is disabled.
Alarm On: Indicates the alarm is enabled.
10
1/25/2018 3:23:22 PM
