Problem
• Unit will not start.
For assistance with your product, visit our website at www.portercable.com for a list of
service centers, or call the PORTER-CABLE Customer Care Center at (888) 848-5175.
WRENCH STORAGE (FIG.12)
The hex wrench (8) can be stored on the
cord as shown in figure 12.
12
8
MAINTENANCE
WARNING:
Unplug tool before
installing or removing accessories, before
adjusting, or when making repairs.
Use only mild soap and damp cloth to
clean the tool. Never let any liquid get
inside the tool; never immerse any part of
the tool into a liquid.
IMPORTANT: To assure product SAFETY
and RELIABILITY, repairs, maintenance
and adjustment (other than those listed
in this manual) should be performed
by authorized service centers or other
qualified service organizations, always
using identical replacement parts.
TROUBLESHOOTING
Possible Cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
Possible Solution
• Plug tool into a working outlet.
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a PORTER-CABLE
service center or authorized
servicer.)
• Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a
PORTER-CABLE service center or
authorized servicer.)
• Have cord or switch replaced
at PORTER-CABLE Service
Center or Authorized Servicer
LUBRICATION
PORTER-CABLE tools are properly
lubricated at the factory and are
ready for use.
SERVICE INFORMATION
All quality tools will eventually require
servicing and/or replacement of parts.
For information about PORTER-CABLE,
its factory service centers or authorized
warranty service centers, visit our website
at www.portercable.com or call our
Customer Care Center at (888) 848-5175.
All repairs made by our service centers
are fully guaranteed against defective
material and workmanship. We cannot
guarantee repairs made or attempted
by others. You can also write to us for
information at PORTER-CABLE, 4825
Highway 45 North, Jackson, Tennessee
38305, (888) 848-5175 - Attention:
Product Service. Be sure to include all of
the information shown on the nameplate
of your tool (model number, type, serial
number, etc.).
ACCESSORIES
WARNING:
than those offered by PORTER-CABLE,
have not been tested with this product,
use of such accessories with this tool
could be hazardous. To reduce the risk of
injury, only PORTER-CABLE
recommended accessories should be
used with this product.
A complete line of accessories is
10
Since accessories, other