Idiomas disponibles
Idiomas disponibles
OPERATION - General
The appliance is intended only for
domestic use, not for professional
use.
1. Permanent filter
2. Thermal carafe
3. Filter holder with pause-and-serve
function
4. Filter holder handle
5. Filter vents
6. Water reservoir lid
7. Water reservoir
8. Water-level indicator
9. Start button with control light
10. Power chord and plug
11. Release button
OPERATION - Before first use
Clean the appliance a couple of times by filling it with water only. Please observe the
following instructions. Dispose of the water after use.
OPERATION - Making coffee
1. Place the appliance on a flat and steady surface. Remove the thermal carafe (2).
2. Open the lid (6) of the water reservoir (7). Pour sufficient water into the reservoir (not less than 2 cups
and not more than 10 cups, as shown on the water-level indicator (8).
3. Open the filter holder (3) by pulling the handle (4) towards you. Use the permanent filter (1) or put a
paper filter (1x 4) in the filter holder. Fill the paper filter with the required amount of ground coffee (the
customary quantity is 1 level scoop for each cup). Close the filter holder by pushing the handle back until
it clicks into place.
4. Place a thermal carafe on the platform.
5. Connect the plug (10) to the wall socket. Switch on the appliance by pushing the start button (9). The
control light will now illuminate and the coffee will be prepared.
6. The pause-and-serve function enables you to pour a cup of coffee before the coffee maker has finished.
Replace the carafe quickly, to prevent the filter from overflowing.
7. The coffee machine automatically stops when the brewing is done. If you wish to halt the brewing
prematurely, you can push the start button again. The control light will extinguish.
8. Remove the plug from the wall socket.
WARNING:
•
Allow the appliance to cool down before using it to brew additional coffee!
5
3
1
11
2
24
EN
6
4
7
10
max
8
8
6
4
2
9
10
