Mitsubishi Electric TRANE NTXWST30A112A Serie Manual De Instrucciones página 8

● OPERATING INSTRUCTIONS ●
E
CONO COOL OPERATION
Press during COOL mode
ECONO COOL operation.
The unit performs swing operation vertically in various cycle according
to the temperature of the unit. Set temperature is set 4°F (2°C) higher
automatically.
Press again to cancel ECONO COOL operation.
• ECONO COOL operation also is cancelled when the VANE or POW-
ERFUL button is pressed.
What is "ECONO COOL"?
Swing air fl ow (change of air fl ow) makes you feel cooler than constant air fl ow.
So, even though the set temperature is automatically set 4°F (2°C) higher, it is
possible to perform cooling operation with keeping comfort. As a result, energy
can be saved.
P
OWERFUL OPERATION
Press during COOL or HEAT mode
start POWERFUL operation.
Fan speed : Exclusive speed for POWERFUL mode
Horizontal vane : Set position, or downward airflow position during
AUTO setting
• Temperature cannot be set during POWERFUL operation.
Press again to cancel POWERFUL operation.
• POWERFUL operation also is cancelled automatically in 15 minutes,
or when the OFF/ON, FAN, or ECONO COOL button is pressed.
En-7
Page 5 to start
Note:
• ON and OFF timers can be set together.
• If power failure occurs while ON/OFF timer is set, see
Page 5 to
T
IMER OPERATION (ON/OFF TIMER)
1
Press or during operation to set the timer.
(ON timer) : The unit will turn ON at the set
time.
(OFF timer) : The unit will turn OFF at the set
time.
* or blinks.
* Make sure that the current time is set correctly.
2
Press (Increase) and
time of timer.
Each press increases or decreases the set time by 10 minutes.
Press or again to cancel timer.
operations.
function"
Page 4
(Decrease) to set the
mark indicates the order of timer
Page 5 "Auto restart