11. Place the filter basket (14) in its place. (Please make sure it is mounted
well).
12. Leave the lid (2) open.
13. Fill carafe (10) with desired amount of water (check the water level
indicator (1) on coffee maker). Pour water into the water tank (4).
14. Place carafe (10) on warming plate (8).
15. Insert power plug into a standard 120V~ 60Hz. wall outlet. The LCD will
display "AM12:00 " (see control panel).
16. Press ON/OFF button, the indicator of RUN will be illuminated. The
appliance will begin working.
17. The brewing process can be interrupted by pressing the ON/OFF button
at any time, and the indicator of RUN will be extinguished. The appliance
will continue brewing once ON/OFF is pressed again.
18. Remove out carafe to serve when finish brewing (about one minute later
after the coffee stops dripping out.)
19. Note: the coffee you get will less than the water you have added, as
some water is absorbed by coffee ground.
20. When the process is finished, if you do not want to serve immediately,
keep the coffee maker is energized, the coffee can be kept warm in the
keeping warm plate, the appliance will be cut off power automatically
after two hours if it has not been manually disconnected at the
completion of brewing. For an optimum coffee taste, serve it just after
brewing.
www.holsteinhousewares.com
7