Idiomas disponibles
Idiomas disponibles
Stopping the unit
The attachment continues to run for a short period after the unit is switched off.
1.
Check to ensure that the attachment does not come into
contact with the surface of the ground or any other impedi-
ment using a beam or other such implement.
2.
Push power button (A) once to turn on power to unit.
Power indicator LED (B) illuminates when power to unit is
turned on.
3.
When you use the trimmer attachment, push mode button
(C), illuminates mode indicator LED (D) (trimmer mode).
When you use the other attachment, push mode button (C),
turn off mode indicator LED (D).
When in trimmer mode, you can work comfortably at the op-
timum RPM speed for the trimmer attachment. When not in
trimmer mode, you can work comfortably at the wide range
of RPM speed with the other attachments.
4.
Hold down trigger switch lockout (E) and depress trigger
switch (F) to increase RPM to operating speed.
5.
To change maximum speed, push speed button (G).
6.
The maximum speed changes in the order of low speed, me-
dium speed, high speed, and then returns to low speed after
high speed.
7.
If you press mode button for one second then keep the
speed at that time.
8.
Not to keep the speed, push mode button.
When power to the unit is turned on:
After 90 seconds of inactivity, unit will power itself off.
If the LED remains lit, operation is normal.
If the LED flashes once per second, the battery needs to
be charged.
If the LED flashes four times per second, there is a fault
within the product. Turn power off to unit. Remove bat-
tery. Clear debris from around line head. Install battery.
Turn power on to unit. If flashing continues, have your au-
thorized servicing dealer repair the product.
WARNING
1.
Release trigger switch and trigger switch lockout, and allow
the attachment head to stop.
2.
Push power button (A) to turn off power to unit.
Power indicator LED (B) turns off when power to unit is
turned off.
If the attachment does not stop when the trigger and trigger
lockout are released, push power button to turn off and re-
move the battery to stop the power supply to product. Have
your authorized servicing dealer repair power button before
using product again.
13
Operation
IMPORTANT
