Idiomas disponibles
Idiomas disponibles
5.
The rotating floor brush may be rinsed off under running water. Make sure that it is completely
before using it.
6.
Place the floor brush back into the floor nozzle when it is clean.
7.
Slide the cover closed again to secure the floor brush.
8.
Push the nozzle back onto the stick. The machine is now again ready for use.
Stuck hairs can
damage the machine or your floor. Always remove the hairs stuck on the brushes.
PROBLEM AND SOLUTION
Problem
The battery charge indicator will
flash on and off.
The machine does not start up.
The machine does not vacuum.
The running time of the machine is
shorter and shorter.
SPECIFICATIONS ADAPTOR
Published information
Linea 2000 BV – Dompel 9 – 2200
Herentals – Belgium
Model number
Supply voltage
Power frequency
Output voltage
Output current
Output power
Average active efficiency
Efficiency at low load
Non-loaded energy consumption
30
DO2035SV
·
The battery is empty. Charge the machine.
·
The battery is empty. Charge the machine.
·
The filters are dirty/the dust reservoir is full.
·
The floor nozzle is clogged/the floor brush is blocked.
·
Clean the machine as described in this manual.
·
The filters are dirty/the dust reservoir is full.
·
The machine is not sufficiently charged. Charge the
machine fully and try again.
·
The battery is broken or old. Contact the after sales service.
·
Stuck hairs. Remove the hairs stuck on the brushes.
Value and precision
DO2035SV
100 - 240
50-60
25.0
0.5
12.5
86.94
73.68
0.06
Solution
-
dry
Unit
-
-
V
Hz
V
A
W
%
%
W
