Idiomas disponibles
Idiomas disponibles
NOTE: For water samples over 100 °F (38 °C) subtract 0.3 from pH result or, for the most accurate result,
wait until water sample is below 90 °F (32 °C) to test.
Remove salt residue daily. Salt will damage the meter and cause inaccurate results. See Cleaning.
SAVE, PRINT, AND SEND TEST RESULTS Test results can be
saved, transferred to the WaterLink Connect 2 mobile app via
Bluetooth, and sent to the BLE Mobile Printer (Code 5-0067).
Test History Settings The WaterLink Spin Touch can log test
results for 250 water samples in the Test History. The results
for the most recent sample will be located at the top of the
list. All results can be logged automatically or results for an
individual sample can be logged after the sample has been
tested.
To turn on automatic logging, tap
Tap
. Select Auto-Save Tests. Tap
the test screen. When Auto Save is selected
highlighted on the Test Results screen.
To manually log results for one sample at a time, Auto-Save
Tests must be disabled. If Auto-Save Tests is disabled
screen. After the test has been run, tap
History.
A user defined identification tag can be assigned to an individual sample result. To enable
tagging, tap
on the Test Screen. Tap
test screen. The tag can be up to 4 hexadecimal characters. It cannot begin with a zero. To tag
a test result, tap
to four characters. Tap
Results screen. Tap
result will appear on the Test Results screen and the Test History screen. The tag will be preceded
by "T-".
Logged results are viewed in Test History. Controls for viewing and managing single or multiple
test records are located on the Test History screen. Tap the checkbox next to a test record to
select it, then tap one of the buttons along the bottom to perform an action with the selected
records.
Print or Send Results to a Bluetooth Phone
or Tablet The WaterLink Spin Touch can print
to the Mobile Bluetooth Printer or send test
results to a Bluetooth-enabled device such
as a phone or a tablet. The highlighted
or
will show which function is active. The
Spin Touch cannot connect to the printer
and connect to a phone or tablet at the
same time.
There are two modes of operation for
connecting to the printer and a phone or
tablet – Fast Printer Connect ON and Fast
Printer Connect OFF. The default mode
is Fast Printer Connect ON. Fast Printer
Connect can be turned on or off from the Bluetooth Menu that is located in the Settings Menu.
If Fast Printer Connect is ON, the meter will connect immediately to the printer upon recognizing
it. It will also connect to a phone or tablet but priority is given to the printer connection. The
printer will start printing immediately when
printer is printing. Fast Printer Connect should be ON if results will be printed more frequently
than results will be sent to a phone or tablet. It can remain selected if results will only be sent to a
phone or tablet. If Fast Print Connect is ON, and the printer is on, the printer will have to be turned
off before results can be sent to a phone or tablet.
If Fast Printer Connect is OFF, the meter has the opportunity to connect to a phone or tablet at all
times other than when the printer is actually printing a test. The meter will connect to the printer
on the Test Screen.
and
on the bottom of the Test Results screen and use the buttons to enter up
to erase a character. Tap
to return to the Test Results screen without saving the tag. The tagged
to return to
will not be
will be highlighted on the Test Results
to save the results for that water sample to the Test
. Select Enable tags. Tap
to save the tag and return to the Test
Test History
12:02A 16-Apr Salt 401
12:01A 16-Apr Salt 301
12:00A 16-Apr T-4650 Chlorine 100
12:00A 16-Apr Chlorine 300
11:57A 16-Apr T-ABC7 Chlorine 300
11:49A 16-Apr Biguanide 400
Select All/
View
De-Select All
Selected
Results
is tapped. The
6
Test Results
Test Time 05:30:06 16-Apr-2020
FCL - 1.31
CYA - 2
COPPER - 0.1
TCL - 1.31
CCL - 0.00
IRON - 0.1
PH - 7.8
PHOS - 0
ALK - 100
SALT - 489
HARD - 230
Save
Print
Tagging
Results
Results
via
Bluetooth
and
to return to the
Delete
History
Home
Selected
Settings
Results
Select
Auto Save
will dim in intensity while the
Transfer
Return
Results
to Test
via
Screen
Bluetooth
Go to Top
Scroll up
or down
the test
list by 5
entries
Go to Bottom
