Idiomas disponibles
Idiomas disponibles
•
Check
that
disconnected.
• Hold the appliance by the
handle (2).
• Press the whisks ejection button
(4) indicated in the image beside
(Fig. 2) with the bigger arrow.
•
Lightly
pull
downwards to extract them.
NOTE: the whisk eject button (4)
can only work if the speed
selector/switch (5) is set to "0"
(OFF position).
WARNING!
Perform this operation only with the appliance unplugged.
4 - MOUNTING AND REMOVING
• Check that the plug is disconnected.
• Place the base (10) on a horizontal and
stable surface, away from heat sources.
• Raise the support arm (13) by pressing
the release button (14) as shown in the
figure beside (Fig. 3).
• Place the bowl (9) in its housing,
checking that the rotation star (11) is
engaged, if it is not, just rotate the bowl
until it enters.
• Lower the arm (13) by pressing the
release button (14).
•
Insert
the
paragraph 2, pag. 15 ) to the Mixer.
3 - REMOVE WHISKS
the
plug
the
whisks
MIXER FROM ITS STAND
selected
whisks
is
(see
18
