Idiomas disponibles
Idiomas disponibles
CODE
7. 00
SPECIAL PRICE START HOUR
NOTE: Uses the 24-hours. clock
7. 00
This is the start hour; 0–23 hours. Select Start
Hour by pressing the keypad.
g
Press the keypad once to advance to next code.
SPECIAL PRICE STOP HOUR
8. 00
NOTE: Uses the 24-hours clock
8. 00
This is the stop hour; 0–23 hours. Select Stop
Hour by pressing the keypad.
g
Press the keypad once to advance to next code.
SPECIAL PRICE DAY
9. 10
9. 10
This represents the day of the week and whether
special pricing is selected for that day. A number
followed by '0' indicates no selection that
particular day (9.10). A number followed by an 'S'
indicates selected for that day (9.1S). To change
the value of '0' and 'S', use the keypad.
Days of the week (1–7) are selected by pressing
the keypad.
When exiting setup code '9', the display must
show current day of week:
DISPLAY
DAY OF WEEK
10
Day 1 = Sunday
20
Day 2 = Monday
30
Day 3 = Tuesday
40
Day 4 = Wednesday
50
Day 5 = Thursday
60
Day 6 = Friday
70
Day 7 = Saturday
g
Press the keypad once to advance to next code.
A. 00
VAULT VIEWING OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
A.
00
Not Selected 'OFF'.
A.
SC
Selected 'ON'. Press the keypad once for this
selection. When selected, the money and/or cycle
counts will be viewable (if counting is selected)
when the coin box is removed.
g
Press the keypad once to advance to next code.
b. 05
VALUE OF COIN 1
b. 05
This represents the value of coin 1 in the quantity
of 5% increments of the larger coin value.
5 x 5%=25%.
By pressing the keypad, there is the option of
1–199 for the quantity of 5% increments.
With coin slide activation, this represents the total
vend price.
NOTE: For coin slide activation, replacement
of the meter case is necessary.
Press the keypad once to advance to next code.
g
EXPLANATION
CODE (selected)
1S
2S
3S
4S
5S
6S
7S
CODE
C. 20
VALUE OF COIN 2
C.
20
This represents the value of coin 2 in the quantity
of 5% increments of the larger coin value.
20 x 5%=100%.
By pressing the keypad, there is the option of
1–199 for the quantity of 5% increments.
C.
05
PN/PR MODELS: This represents the value of
coin 2 in the quantity of 5% increments of the
larger coin value. Factory default = 5 x 5% of the
larger coin value.
Press the keypad once to advance to next code.
g
d. 00
COIN SLIDE OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
d.
00
Not Selected 'OFF'. Used with coin drop or card
readers.
d.
CS
Selected 'ON'. Press the keypad 3 consecutive
times for this selection.
NOTE: This option needs to be set to "00" unless
the meter case has been changed to accept a
coin slide device.
When coin slide mode is selected 'On', set b.
equal to value of vend price. Set setup code 6
(regular cycle price) and setup code 3 (special
cycle price) to number of slide pushes. If washer
is set up as "CS" and a coin drop is installed, it
will not register coins.
NOTE: For coin slide activation, replacement
of the meter case is necessary.
g
Press the keypad once to advance to next code.
ADD COINS OPTION
E. 00
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. This option causes the
customer display to show the number of coins
(coin 1) to enter, rather than the amount.
E.
00
Not Selected 'OFF'.
E.
AC
Selected 'ON'. Press the keypad 3 consecutive
times for this selection.
g
Press the keypad once to advance to next code.
F. 00
ENHANCED PRICING OPTION
F.
00
Not Selected 'OFF'.
F.
CP
Cycle-Based pricing enabled. This option allows
configuration of different prices for cold, warm,
and hot water cycles.
F.
Su
Super Cycle pricing enabled. This option allows
customers to upgrade cycles by depositing
extra money. Setup codes "H." and "h." will be
displayed only when this option is enabled. Press
the keypad once for this selection.
g
Press the keypad once to advance to next code.
SUPER CYCLE UPGRADE PRICE
H. 01
(Skipped unless super cycle pricing is enabled.)
H. 01
This represents the number of coin 1 required to
upgrade a base cycle to a super cycle. Advance
from 0–39 by pressing the keypad.
g
Press the keypad once to advance to next code.
EXPLANATION
17
