Philips Sonicare ProtectiveClean 4100 Serie Manual De Instrucciones página 17

- The UV light bulb remains on when the door is open.
- The window is broken or missing from the sanitizer.
- The sanitizer gives off smoke or a burning smell while
it is operating.
Note: UV light can be harmful to the human eye and skin.
This device should be kept out of reach of children at all
times.
1 After brushing, rinse the brush head and shake off
excess water.
Warning: Make sure that the brush head cap is
not on the brush head when the brush head is
being cleaned in the sanitizer.
2 Place your finger in the door recess on top of the
sanitizer and pull open the door.
3 Place the brush head on one of the 2 pegs in the
sanitizer with the bristles facing the light bulb.
Note: Only clean Philips Sonicare snap-on brush heads
in the sanitizer.
Note: Do not clean Philips Sonicare for Kids brush
heads in the sanitizer.
4 Make sure the sanitizer is plugged into a live outlet of
appropriate voltage.
5 Close the door and press the green power on/off
button once to select the UV clean cycle.
Note: You can only switch on the sanitizer if the door is
properly closed.
Note: The sanitizer stops operating if you open the door
during the sanitizer cycle.
Note: The sanitizer cycle takes approximately 10 minutes
and then switches off automatically.
The sanitizer is in operation when the light glows
through the window.
17
English