PNI C120 Manual De Usuario página 8

Also, it is displayed the status: OK (>74%), Check (50-74%) or Low/Bad
(<50%):
• - Alternator output
Measures battery capacity to determine its ability to start a vehicle's engine.
When A1 appears on the display, rev the engine to 3000rpm * + SET. Keep
the engine running at 3000rpm for 10 seconds until the timer on the screen
reaches 0.
When A2 appears on the screen, rev the engine at 2000rpm ** + SET. Keep
the engine running at 2000rpm for 10 seconds until the timer on the screen
reaches 0.
* 3000 rpm no battery loading (for example, no lights, AC etc.)
** 2000 rpm no battery loading (for example, no lights, AC etc.)
Memory function
The memory function allows saving audio and electrical settings when the
vehicle battery is removed.
1. Connect the charger's clips to the vehicle battery terminals.
2. Connect the charger to the AC mains, then press the Auto Charge
button for 5 seconds. Memory Saver mode is activated if MEM appears
on the screen.
3. Remove the vehicle battery.
Note: Connect the charger and the battery correctly (red to + and black to
-) before pressing the Smart Charge button, to make sure you do not lose the
electrical and audio settings of the vehicle.
User manual 8