Idiomas disponibles
Idiomas disponibles
90546223 PC1800FL PC180FL
• Don't touch lens surface when bulb is lit or immediately after use.
• Handle light with care around any flammable surface.
• Do not expose light or charger to wet or damp areas. Do not expose light or charger to
rain or snow.
• Do not wash light or charger with water or allow water to get inside light or charger.
• While light is in use, do not cover with cloth or other flammable materials due to
increased risk of fire.
• Do not operate without lens cover assembly attached.
• For household use only.
WARNING:
flammable liquids or in gaseous or explosive atmospheres. Internal sparks may ignite
fumes causing personal injury.
WARNING:
replacing the lamp. Replace bulb with same type rated KPR 18V 0.3A. Such
preventative safety measures reduce the risk of personal injury.
WARNING:
of burns, do not touch hot lens. To reduce the risk of fire, keep away from combustible
materials while in operation.
CAUTION:
surface where it will not cause a tripping or falling hazard. Some tools with large
battery packs will stand upright on the battery pack but may be easily knocked over.
SAVE THESE INSTRUCTIONS
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains
relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols
below are used to help you recognize this information.
DANGER:
avoided, will result in death or serious injury.
WARNING:
avoided, could result in death or serious injury.
CAUTION:
avoided, may result in minor or moderate injury.
CAUTION:
hazardous situation which, if not avoided, may result in property damage.
SYMBOLS
The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V..................volts
Hz................hertz
min ..............minutes
............direct current
................Class II Construction
(double insulated)
..............safety alert symbol
1/6/09
10:22 AM
Page 4
Burn hazard. Do not operate flashlight or charger near
Shock Hazard. Always remove battery before
The lens gets very hot during use. To reduce the risk
When not in use, place tool on its side on a stable
Indicates an imminently hazardous situation which, if not
Indicates a potentially hazardous situation which, if not
Indicates a potentially hazardous situation which, if not
Used without the safety alert symbol indicates a potentially
A ..................amperes
W..................watts
................alternating current
n o ................no load speed
................ earthing terminal
.../min or rpm ....revolutions or reciprocations
4
per minute
