English
5.4
Operator
WARNING
■ Working with the power tool can be strenuous. The
operator must be in good physical condition and mental
health. To reduce the risk of personal injury from fatigue
and loss of control:
– Check with your doctor before using the power tool
if you have any health condition that may be
aggravated by strenuous work.
– Do not operate the power tool while under the
influence of any substance (drug, alcohol or
medication, etc.) that might impair vision, balance,
dexterity or judgment.
– Be alert. Do not operate the power tool when you are
tired. Take a break if you become tired.
– Do not permit minors to use the power tool.
■ According to STIHL's current knowledge, the electric
motor of this power tool should not interfere with a
pacemaker.
– However, persons with a pacemaker or other
implanted medical device should consult their
physician and device manufacturer before operating
the power tool.
5.5
Personal Protective Equipment
WARNING
■ Even a properly installed and adjusted deflector may not
protect the operator from all foreign objects thrown or
flung by the cutting attachment. Thrown objects may also
ricochet and strike the operator. To reduce the risk of
personal injury:
– Always wear proper clothing and protective apparel,
including proper eye protection.
■ Loss of control and severe cut injuries may result if hair,
clothing or apparel make contact with the moving cutting
attachment or otherwise become entangled in the
components of the trimmer / brushcutter. To reduce the
risk of severe personal injury:
10
5 IMPORTANT SAFETY INSTRUCTIONS
– Wear sturdy and snug-fitting clothing that
also allows complete freedom of
movement.
– Wear overalls or long pants made of
heavy material to help protect your legs.
Do not wear shorts.
– Avoid loose-fitting jackets, scarves, neckties, flared
or cuffed pants, jewelry and any other apparel that
could be caught on branches, brush or the moving
cutting attachment.
– Secure hair above shoulder level before starting
work.
■ To reduce the risk of eye injury:
– Always wear goggles or close-fitting
protective glasses with adequate side
protection that are impact-rated and
marked as complying with ANSI Z87 "+".
– If there is a risk of facial injury, STIHL recommends
that you also wear a face shield or face screen over
your goggles or protective glasses. When working
with a metal cutting attachment, always wear a face
shield.
– Wear an approved protective helmet when there is a
risk of head injury.
■ Good footing is very important. To help maintain a secure
footing and reduce the risk of injury while working:
– Wear substantial footwear with non-slip
soles. Do not wear sandals, flip-flops,
open-toed or similar footwear. When
working with a metal cutting attachment,
wear steel-toed safety boots.
■ To improve your grip and help protect your hands:
– Always wear heavy-duty non-slip work
gloves made of leather or another wear-
resistant material when handling the
trimmer / brushcutter.
– Always wear heavy-duty work gloves
when mounting or otherwise handling a
metal cutting attachment.
0458-725-8621-B