Idiomas disponibles
Idiomas disponibles
Start
Start of engine
CAUTION
・When starting the engine, make sure to put
water or chemicals into the chemical tank.
Without water or chemicals in the tank, the
pump will break down.
・It is confirmed that the ball cock has closed
before it starts.
1
Perform priming.Push priming pump installed
in front of the carburetor (rear in the
specification with cell starter) several times
slowly,and confirm that fuel fills the priming
pump and returns to the tank.
Priming pump
2
Fully close the choke. (In hot weather or
when engine is hot, the choke should be
partly open or fully open.)
3
Move throttle lever to medium-and lowspeed
position.
4
Set handle of pressure control valve at
"Start" position.
7
Ｅｎｇｌｉｓｈ
