Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. Fix the rear guard (5)
•
Remove the blade assembly nut (2) and the rear guard nut (4) from the engine shaft (6).
•
Position the rear guard (5) onto the engine shaft (6) while ensuring that the mark "I" on
the rear guard (5) is up.
•
Then re-position the rear guard nut (4) onto the engine shaft (6), and tighten it to se-
cure the rear guard (5).
•
Loosen nut of rear guard by turning it anti-clockwise to
clockwise to
3. Fix the blade assembly (3)
•
Slide the blade assembly (3) onto the engine shaft (6) and make sure the engine shaft
(6) is fully seated into the groove of the blade assembly (3).
•
Then tighten the blade assembly (3) by fastening the blade assembly nut (2).
•
Loosen nut of blade by turning it clockwise to
to .
4. Fix the front guard (1)
•
Position the front guard (1) over the rear guard (5) while ensuring the marks "I" and
"II" on the front guard (1) are up, and align the mark "I" on the front guard (1) with the
mark "I" on the rear guard (5).
•
Then turn the front guard (1) clockwise until the mark "I" on the rear guard (5) is locat-
ed in the center of the mark "II" on the front guard (1).
•
Finally tighten the front guard (1) with the safety screw (12).
.
,and fix it by turning it
,and fix it by turning it anti-clockwise
25
Tabla de contenido
