KitchenAid 5KFP1318 Serie Manual Del Propietário página 7

PRODUCT ASSEMBLY (CONTINUED)
INSTALLING THE MULTIPURPOSE BLADE OR DOUGH BLADE
1.
Install the Lower Drive Adapter onto the Upper Drive Adapter. Place the Blade on the Drive
Adapter. Rotate the Blade so it falls down to the Base of the Adapter.
2.
Install the Work Bowl Cover, and be sure the Lid Latch is pushed down to the locked
position.
INSTALLING THE EXTERNALLY ADJUSTABLE SLICING DISC
1.
Hold the Slicing Disc by the finger grips and lower it onto the Drive Adapter.
2.
To attach the Work Bowl Cover, hook the Lid Hinge into the Handle Hinge on the Work
Bowl and close the Cover.
TIP: You may need to adjust the Drive Adapter with a slight turn on the power shaft until it
drops into place. For easiest installation, make sure the Adjustment Knob is in the "0"
position.
3.
Once the Work Bowl Cover is closed, the Lid Latch will lock in position.
NOTE: Your Food Processor will not operate unless the Work Bowl Cover is fully closed,
the large Pusher is inserted to the Max Fill Line, and the Work Bowl is properly seated on
the Base.
ADJUSTING THE SLICING THICKNESS
1.
Set the desired thickness by moving the Knob to the left for thinner slices and to the right
for thicker slices.
NOTE: The Knob only works with the Externally Adjustable Slicing Disc. Changing
thickness settings with other discs or Blades installed will have no effect on operation.
A
A. Thinner
B. Thicker
B
7