EGO SUN SHADE AMS1000 Manual Del Operador página 6

5. Hold the crossbar between the posts to align the two
mounting holes on both ends of the crossbar with the
two lower mounting holes of each post. Insert four
hex flange bolts B and flange nuts on both sides and
finger-tighten the bolts and nuts (Fig. 3).
6. Securely tighten all four bolts on both sides by two
wrenches (not included).
7. Lift the left stand tube marked with "L" to align the
two bottom holes in the stand tube with the holes in
the left post on the mower as shown in Fig. 4.
8. Use two hex flange bolts C and flange nuts to secure
the stand tube to the post using two wrenches (not
included) (Fig.4).
9. Attach the right stand tube marked with "R" in the
same way to the right post.
6
SUN SHADE — AMS1000
3
Crossbar
Post
4
Stand Tube
Post
"L" Mark