Idiomas disponibles
Idiomas disponibles
Tools required: Phillips screwdriver, Power Drill, 3/8" Drill Bit and Rubber Mallet.
11. Ask for assistance to position the assembled bookcase at the desired location against a wall. If necessary,
adjust the pre-attached floor levelers at the bottom of Legs (G) to level the unit.
12. Follow the instructions printed on the plastic bag containing the tipping restraint hardware to attach the
tip-over restraints to the unit and the wall.
NOTE: The tipping restraint hardware included is for drywall construction. It will be necessary to drill
holes for the wall anchors. Depending upon your wall construction, different anchor hardware maybe
required. Please contact your local hardware store for assistance.
Assembly Instructions
8
