Idiomas disponibles
Idiomas disponibles
6. Now, go back and tighten all Cam Locks and Screws. Make sure that all the parts are tight and there are
no gaps between the parts. This will help keep the unit square.
7. Unfold the Back Panel (E) and position it onto the back of the assembled unit. Make sure the margins
along all edges of the Back Panel are equal. Gently hammer the 19 mm Ring Shank Nails (7) through
the pre-drilled holes on the Back Panel.
NOTE: We recommend attaching back panel with the nails at the corners first.
9
8. Ask for assistance to stand the assembled unit upright.
9. Plug the Cam Lock Covers (9) onto the visible Cams Locks to conceal the Cams.
10. Insert the Shelf Pins (8) into the desired holes in the Side Panels (B and C). Make sure that you place
four Shelf Pins in the same level so the shelf is not tilted. Tilt and rest the Adjustable Shelves (F) onto
the Shelf Pins (8) making sure the end notches of the Shelf fit onto the Shelf Pins properly.
Assembly Instructions
7
7
E
A
B
E
C
C
F
F
7
D
8
8
