Idiomas disponibles
Idiomas disponibles
Installation
5. Fit the STD screen cover ⓕ
which was removed in step 2
to the Wind screen ① by using
the screws ⓖ.
6. Install the Wind screen ① by using the screws ⓐ, washers ⓒ, nuts
ⓓ which were removed in step 1.
Screw ⓐ: 10.0N·m
( 1.1 kgf-m, 7.4 lbf-ft )
1. When cleaning the screen, rinse it with water to remove grit and dirt,
Care
wash the screen with a clean flannel cloth or soft chamois soaking a
and
Maintenance
mild nonabrasive liquid soap, and rinse well with plenty of water to
remove all soap residue.
Dry it as lightly patting with a soft cloth or equivalents.
2. Don't use organic solvent like thinner. It may damage the surface of
the screen.
ⓕ
①
ⓐ
GENUINE SUZUKI ACCESSORIES
1. Remove the STD screws
the STD bolts ⓒ and the
box.
①
The STD screws ⓐ, ⓑ a
STD bolts ⓒ will be reused
2. Remove the STD screws
the helmet box cover.
The STD screws ⓓ will be r
later.
ⓒ
ⓓ
5
/5
ⓖ
