Idiomas disponibles
Idiomas disponibles
MAKING HOME-MADE CHIPS
For the best results, we advise to use frozen chips. If you want to make home-made chips, follow
the steps below.
1. Choose a variety of potato recommended for making chips. Peel the potatoes and cut them
into equal thickness chips.
2. Soak the potato chips in a bowl of cold water for at least 30 minutes, drain them and dry
them with a clean, highly absorbent tea towel. Then pat with paper kitchen towel. The chips
must be thoroughly dry before cooking.
3. Pour 1 tablespoon of oil (vegetable, sunflower or olive) in a dry bowl, put the chips on top
and mix until they are coated with oil.
4. Remove the chips from the bowl with your fingers or a kitchen utensil so that any excess oil
stays behind in the bowl. Place the chips in the bowl.
Note: Do not tip the container of oil coated chips directly into the bowl in one go,
otherwise excess oil will end up at the bottom of the bowl.
5. Fry the chips according to the instructions in the section Cooking guide.
CLEANING
Clean the appliance after every use.
The bowl and the grids have a non-stick coating. Do not use metal kitchen utensils or abrasive
cleaning materials to clean them, as this may damage the nonstick coating.
1. Remove the mains plug from the wall socket and let the appliance cool down.
Note: Remove the bowl to let the appliance cool down more quickly.
2. Wipe the outside of the appliance with a damp cloth.
3. Clean the bowl, the grids and the water tank with hot water, some washing-up liquid and a non-
abrasive sponge. You can use a degreasing liquid to remove any remaining dirt.
Warning: the bowl, the grids and the water tank are not dishwasher safe.
Tip: If dirt is stuck at the bottom of the bowl and the grid, fill them with hot water and
some washing-up liquid. Let the bowl and the grid soak for approximately 10 minutes.
Then rinse clean and dry.
4. Wipe inside of the appliance with hot water and a damp cloth.
5. Clean the heating element with a dry, cleaning brush to remove any food residues.
6. Do not immerse the appliance in water or any other liquid.
CLEANING AFTER STEAM USE
1. Unplug the appliance after use.
2. Press
to launch the purge of the water circuit in order to remove residual water from the
water circuit.
3. When the program is finished, take the bowl out of the appliance and empty the residual water
from the bowl.
4. Wash the bowl, the water tray and the water tank in warm water and washing up liquid,
rinse and dry.
Note: For the appliance to function properly, it is necessary to carry out regular cold
descaling. To do this, always use the dedicated function
will not be effective in completely removing scale build-up.
. Running hot with vinegar
10
DESCALING
For optimum operation of the appliance, descale the appliance regularly. To do this :
1. Pour 200 ml of water into the water tank. We recommend the use of purified water.
2. Add 200 ml of white vinegar.
3. Make sure the water tank's cap is in place and locked. Put back the water tank into place.
4. Launch the program
.
5. When the program is finished, open the appliance and empty the liquid from the bowl.
6. Rinse the inside of the water tank with warm water then fill it with water. We recommend
the use of purified water.
7. Put back the water tank into the appliance.
8. Press
to launch the purge of the water circuit in order to rinse the water circuit.
9. When the program is finished, open the appliance and empty the water from the bowl.
10. Wash the bowl, the water tray and the water tank in warm water and washing up liquid,
rinse and dry.
Note : Every 10 hours of steam mode use,
STORAGE
1. Unplug the appliance and let it cool down.
2. Make sure all parts are clean and dry.
GUARANTEE AND SERVICE
If you need service or information or if you have a problem, please visit the T-fal website at
www.t-fal.com or contact the T-fal Consumer Care Centre in your country. You can find the
phone number in the worldwide guarantee leaflet. If there is no Consumer Care Centre in your
country, go to your local T-fal dealer.
TROUBLESHOOTING
If you encounter problems with the appliance, visit www.t-fal.com for a list of frequently asked
questions or contact the Consumer Care Centre in your country.
is blinking. It indicates you to launch a descale program.
11
EN
