Idiomas disponibles
Idiomas disponibles
1. INTRODUCTION
This
instructive
instructions, specifications and maintenance for the multimeter,
which is compact, hand-held and battery operated.
This instrument performs a.c / d.c. voltage measurements, a.c. / d.c.
current, resistance, audible continuity, diode, hFE, frequency,
capacitance and temperature.
The multimeter is 3-1/2 digits, it counts to 1 999 with some automatic
range functions.
It has functions to indicate polarity, data retention, over-range
indication and automatic shutdown. Its operation is very simple and
it is an ideal instrument.
The design of the digital multimeter is in accordance with the
electronic measuring instruments, with over voltage category
(CAT III 600 V, CAT II 1 000 V) and pollution degree 2.
WARNING
To avoid possible electric shock or personal injury, and possible damage
to the Digital multimeter or the equipment under test, follow the
following rules:
Before using the Digital multimeter inspect the case. Do not use the
multimeter if damaged or part of the case has been removed. Look
for cracks or missing plastic Double check insulation around the
connectors.
Inspect the test probes for damaged insulation or exposed metal.
Check the test probes have continuity.
Do not apply more than the rated voltage as marked on the
multimeter, between the terminals or between any terminal and
grounding.
The rotary switch must be placed in the correct position and there
must be no changes while the measurement is being carried out.
Special care should be taken when the multimeter is working at an
effective voltage higher than 60 V in c.c or 30 V RMS a.c., as there is
a danger of electric shock.
provides
all
safety
ENGLISH
information,
operation
