Idiomas disponibles
Idiomas disponibles
7 - Installation preparation
EN
This appliance must never be installed close to heat sources,
e.g. heating elements or cookers, nor in damp places.
Seek the help of another individual, or two, when installing
this appliance. This appliance may have sharp edges. Wear
adequate PPE for the task and environment
• To ensure the appliance is level, you should use the height
adjustable feet at the front of the appliance.
• The cooling system at the rear of the appliance must not
touch the rear wall. The greater the gap, the better.
• The appliance must be installed with adequate ventilation.
Ensure that there is clearance above the appliance to
allow air to escape and that there is space between the
rear of the appliance and the wall.
10
Ventilation
The main consideration when installing any refrigeration
unit into a fitted kitchen is ventilation. The heat removed
from the cooling compartment needs to be dissipated into
the atmosphere. Incorrect ventilation can lead to premature
compressor failure, excessive power consumption, total
system failure and may invalidate the warranty provided
with the appliance. For products intended to be installed
into a tall housing unit, the following requirements need to
be met:
