Emerson AVENTICS AF2 Instrucciones De Servicio página 31

Objective Submenu
Set the display for screen 1.2 Pages
Set the display for screen 1.3 Pages
Set the display for screen 2.1, Pages
2.2, and 2.3
Optimize readability Rotation
Activate the screen saver ScreenSaver
Switch off the display AutoOff
Setting the brightness Brightness
Assign PIN to protect against Display Pin
operation and manipulation
Display Units
Fig. 10
Pages
Rotation
Fig. 11
AVENTICS™ AF2 | R412026496–BAL–001–AB | English
Option
• Select Disp2Top
• Select Disp2Btm
• Select Disp3Top
• Select Disp3Btm
Select display parameters in the Dis-
pHistory menu
Set the display to 0°, 90°, 180°, or
270°
Set the time for screen saver activa-
tion
Set the time for switching off the
display
Setting the brightness in percent
Assign 4-digit PIN
MassFlowRat kg / h
kg / min
g / s
abort store
FlowVelocity m / s
fps
abort store
Volume m
3
ft³
L
abort store
VolFlowRate m / h
3
ft / min
3
ft / s
3
L / min
L / s
m / min
3
abort store
Mass kg
abort store
Energy kWh
abort store
Temperature °C
°F
abort store
Pressure bar
psi
abort store
Disp1 Top MassFlowRate
Pressure
Temperature
Energy
Disp1 Btm
Mass
VolumetricFlowRate
Volume
Disp2 Top
FlowVelocity
Disp2 Btm
Disp3 Top
Disp3 Btm
Disp History abort store
0°
90°
180°
270°
abort store
ScreenSaver
AutoOffOff
Brightness
DisplayPin
Fig. 12
Simulate
Objective Submenu
Simulate media flow Flow
Simulate temperature Temperature
Simulate pressure Pressure
Simulate Flow
Temperature
Pressure
Fig. 13
Measure
Objective Submenu
Set the measuring medium Flow
Set the reference standard Flow
Set the reference pressure for Flow
application-specific setting
(UserDefined)
Setting the zero offsets Flow
Setting the low flow cut-off Flow
Mean value filter for measur- Flow/Pressure/Temperature
ing value smoothing in dis-
play and output
Setting the offset/zero offsets Pressure
Off
1 min
2 min
5 min
10 min
30 min
60 min
abort store
Off
1 min
2 min
5 min
10 min
30 min
60 min
abort store
40 %
60 %
80 %
100 %
abort store
#_#_#_#
abort store
Option
Simulate media flow
Simulate temperature
Simulate pressure
SimOff
0 % ... 100 %
abort store
SimOff
0 % ... 100 %
abort store
SimOff
0 % ... 100 %
abort store
Option
Select the Medium option and
set the measuring medium:
• Air
• Argon
• Helium
• CO2
• Nitrogen
Select the RefCond option and
set the reference standard:
• ISO2533
• ISO1217
• DIN1945-1
• DIN1343
• ISO6358
• ISO8778
• UserDefined (application-
specific)
Select the RefCond option and
select UserDefined (applica-
tion-specific reference pres-
sure)
Select the 0-FlowOff option
and set the zero offsets
Select the 0-FlowCut option
and set the low flow cut-off
Select the Filter option and
set the measured value filter
Select the Offset option and
set the offset/zero offsets
31