Idiomas disponibles
Idiomas disponibles
Components
Carrying string for easy transport.
1. Lanyard
Hold the button for power on/off, press the button to
2. Power/mode button
change between Aux mode and TWS. Press it twice
for TWS pairing mode.
Note: You will only be able to change modes if a
device is connected to Aux In in the speaker.
In order to adjust the volume level, briefly press the +
3. Volume up +/next track button
button. Press and hold the + button to play the next
track.
In order to adjust the volume level, briefly press the -
4. Volume down -/previous track
button. Press and hold the - button to play the
button
previous track.
Microphone location
5. Microphone
Briefly press this button to play or pause audio. Briefly
6. Play/pause/answer call/end
press this button to answer an incoming call or end
call/redial/Bluetooth
/ multifunction
®
the call. Press and hold this button to reject the call.
button
Press this button twice to call back the last number
dialed on your phone. Note: Audio will stop and
resume automatically once the call is ended. Press and
hold this button to release Bluetooth
7. LED function indicator
Bluetooth
Successful pairing: White LED blinks slowly.
Aux mode: White LED.
Mute: White LED blinks slowly.
Description
connection.
®
mode/search status: White LED.
®
8. Aux in cable connection interface
9. Battery LED charge indicator
10. Micro USB charging port
III. Basic operation
A. Charging the speaker
• Plug one end of the supplied Micro USB cable into the speaker's Micro USB port
and the other end to the USB port of a 5V USB adapter to charge the battery.
• The battery takes around 3.5 hours to fully charge.
• Make sure that the speaker is fully charged before using it for the first time.
• While the speaker is being charged the battery LED indicator glows red with the
speaker on or off.
• Once the speaker is fully charged, the battery LED indicator turns off.
Note: If the speaker is completely discharged or has not been charged for a while, it
is recommended to charge it for at least 10 minutes prior to powering on the
speaker.
Use this input to connect any external audio device
fitted with a 3.5mm stereo output.
This LED indicates the charging status of the
speaker while it is powered on. Red LED indicates
the unit is charging. The red LED will turn off when
fully charged.
Use this Micro USB connector to connect to an
external 5V power source
