Idiomas disponibles
Idiomas disponibles
Torsion adjustment
The torque of three gears can be
adjusted according to the demand by
using the torque adjustment button
3. The machine has its own torque
protection function,
1st gear:
Suitable for screwing in or out small
diameter screws
3rd gear:
Suitable for screwing in or out large
diameter screws
OPERATION
Torsion adjusting
Before each use, please
adjust to the appropriate
torque gear, otherwise it's easy to
slip
Power display operation
Press and hold the power display
button 3 for more than 3 seconds
MAINTENANCE
Your power tool requires no additional lubrication or
maintenance. There is no user serviceable parts in your
power tool. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place.
TROUBLE SHOOTING
problem
Battery will
not charge
See Fig E
See Fig E
During
operation,
See Fig F
the
screwdriver
stops
working
ENVIRONMENTAL PROTECTION
components are labeled for categorized recycling.
Possible cause
1. USB cable not
1. Plug in the USB
plugged in
cable again, and
check the status
2. Surrounding
of the lamp and
air temperature
check whether
is too hot or too
the current is
cold
connected
2. Move the
product to an
environment
with appropriate
temperature for
charging
The battery of
Charge or increase
screwdriver is
torque
dead, or the
torque cannot
reach
Disposal
The machine, its accessories and
packaging materials should be sorted for
environmentally friendly recycling. The plastic
Solution
27
